Pictures of on-site application of hot melt glue stick

Fast curing, easy operation, high strength hot melt glue sticks

Hot melt glue sticks with quick drying, yellowing resistance, high and low temperature resistance, etc.

Good penetration performance, multipurpose hot melt glue stick

Safe and environmentally friendly, no volatile gas, and can pass ROHS certification

How to use hot glue stick

1. You need to communicate with the hot melt glue stick supplier about the bonding requirements (bonding materials, curing time, high and low temperature resistance, yellowing resistance, glue stick size, etc.), and provide suitable hot melt glue sticks for testing.
2. Insert the hot melt glue stick into the rear end of the glue gun, turn on the power and preheat for 3-5 minutes until the glue stick is completely melted (glue dripping from the glue gun mouth indicates that the temperature meets the standard).
3. Aim the glue gun mouth at the part to be bonded, and pull the trigger to evenly apply the melted glue on the bonding surface.
4. Apply a certain amount of pressure to the bonding surface to facilitate better penetration of the glue. Let it stand for 1-2 minutes until the glue is completely cured.
5. After use, just turn off the power of the glue gun. Wait until the next time you use it, just turn on the power.

Suitable for hot melt glue stick bonding process

Hot melt glue stick fou speakers, photo frames, cartons, pearl cotton, artificial flowers, LED luminous characters, DIY, woodworking, filter, handicrafts, handbags, etc.

Hot melt glue sticks application notes

1. The bonding materials and operating environment will affect the bonding effect. It is recommended to try it first before using it in large quantities.
2. When using hot melt glue sticks for bonding, it is necessary to apply a certain amount of pressure to the bonding point so that the glue can penetrate into the bonding material well.
3. Preheating for 3 to 5 minutes is required for the first use, and bonding can be carried out after the glue is discharged smoothly.
4. Before using the hot melt glue stick, be sure to properly clean and treat the surface of the bonded object to ensure that the hot melt glue can fully exert its viscosity.
5. Different hot melt glue sticks have different curing time and temperature requirements. Too high or too low temperature will cause the viscosity of the hot melt glue to decrease.
6. When the hot melt glue gun is in use, the temperature of the nozzle and the molten glue is very high. Except for the handle, other parts cannot be touched to avoid burns.‌‌

Hot melt glue sticks FAQs

Q1.Why can’t hot melt glue sticks bond to materials?

A1. a.The melting temperature has not been reached. b. The type of glue stick is not suitable. c. No pressure is applied. d. The surface of the bonded object is not clean.

Q2.Why does the hot melt glue gun leak glue?

A2.a.The seal of the glue gun is not good. b. The glue temperature of the glue gun is too high. c. The hot melt glue stick is not properly filled.

Q3.How to Remove Hot Melt Glue?

A3.You can use medical alcohol to apply on the hot melt adhesive to remove it.

Q4.Why doesn’t the hot melt glue gun work?

A4.a. Improper temperature setting. b. Glue stick quality problem. c. Glue gun is clogged inside.d. Glue gun power supply problem.

Q5. What are the types of hot melt glue sticks?

A5. According to the diameter, it is divided into 7mm/11mm/15mm hot melt glue sticks; according to the length, it is divided into 27cm/30cm hot melt glue sticks; according to the industry, it is divided into woodworking/electronic assembly/packaging/textile/handicraft/filter/DIY hot melt glue sticks; according to the performance, it is divided into high temperature/low temperature/color changing/environmentally friendly/low odor/UV resistance/multi-purpose hot melt glue sticks.

Q6. Do you support OEM/customization/wholesale hot melt glue sticks?

A6. Yes, we can provide OEM/customization/wholesale hot melt glue sticks based on your specific needs (size, adhesive material, curing time, and performance).

Where to buy strong hot glue sticks in bulk

Manufacturers or adhesive traders looking to buy hot melt glue sticks in bulk can choose Blue Rhino Adhesives. Zhongshan Blue Rhino New Materials Co., Ltd. is a top hot melt glue stick manufacturer, factory, supplier, and exporter in China, offering bulk, OEM, and custom hot melt glue sticks.

Why choose our hot melt glue sticks

1. With 20 years of experience in adhesive research and development, well-known hot melt glue sticks supplier in China,our technical engineers have a thorough understanding of bonding substrates and gluing processes, greatly improving your production efficiency.

2. In order to ensure the stable quality of the adhesive, all raw materials used come from international chemical giants, such as: LG Chem, Celanese, Dow Chemical, BASF, Sinopec

3. 18 fully automatic intelligent glue production lines, well-known hot melt glue sticks manufacturer in China, with an annual output of more than 50,000 tons, and sufficient inventory to ensure that goods reach customers on time.

4. Our hot melt glue sticks have SGS, VOC, ROHS, ISO9001 and other test reports to ensure that the glue is safe and environmentally friendly.

5. We have many years of experience in international logistics and transportation, and are familiar with sea shipping, land transportation, air transportation and other methods, so you don’t have to worry about glue transportation.

Order process