Pictures of on-site application of wood white glue

Good initial adhesion, fast drying, easy to apply glue

Ideal gluing speed, wide adaptability, durable wood Glue

High bonding strength, Biodegradable, Eco-friendly wood glue

The material breakage rate can reach more than 90%, simple operation

How to use wood white glue

1. According to the density of the wood, ask the wood white glue suppliers to provide the appropriate glue.
2. Smooth, polish and clean the wood surface.
3. Use tools (brush, roller, glue applicator, etc.) to apply glue to the wood surface.
4. Use tools (clamps, straps, press, etc.) to apply pressure to the wood for a certain period of time.
5. After removing the pressure, let it dry naturally for at least 48 hours before entering the next processing step.

Wood white glue application notes

1. Recommended operating ambient temperature: 8-38°C. The surface of the substrate should be clean, flat, wax-free, not warped, and tightly adhered.
2. When opening a new barrel, stir the adhesive to make it uniform to avoid the influence of water vapor. Seal immediately after removing the glue to prevent film formation on the adhesive surface.
3. Glue coating amount: 110-180 g/m² of glue applied on one side, adjusted according to the material and glue type, and the standard is to extrude a uniform glue line after lamination.
4. Control the closing time of the assembly to less than 15 minutes, and keep the pressure balanced during pressurization, that is, ensure that the plate is evenly stressed at all parts, and there are no biased or pressure-free parts.
5. Pressurizing time, cold pressing (summer): 60-180 minutes; pressurizing pressure: 1.5kg-1.8kg/cm².
   Cold pressing (winter): 90-300 minutes; pressurizing pressure: 1.5kg-1.8kg/cm2
6. After pressure relief, it should be aged for a period of time (when the temperature is <15°C, wait for 24 hours before entering the next processing step; (when the temperature is >15°C, wait for 12 hours before entering the next processing step).)
7. When testing is required, please test at least 7 days later to ensure accurate test results.

Wood white glue FAQs

Q1. What wood can be bonded with white glue?

A1. Conventional wood can be bonded with white glue, such as low-density solid wood, medium-density fiberboard, density fiberboard, melamine board, foam board, etc., but the process requirements still need to be considered to choose the right glue.

Q2.Why can’t the wood bond together after being glued?

A2.a. The moisture content of the wood is too high or too low. b. The wood surface is uneven and has bumps and dents. c. The wood surface is not polished and the wood pores are sealed by dust, which prevents the glue from penetrating. d. The pressure applied to the bonded wood is insufficient or uneven. e. The amount of glue applied is too low. f. The density of the wood is too high and the glue selected is incorrect.

Q3. How long does it take white glue to dry?

A3. It usually takes between 30 minutes and 4 hours, but the specific time depends on the density of the wood, the temperature and humidity of the environment, and the formula of the glue. If you need to proceed to the next process, it is recommended to dry for at least 48 hours so that the glue can reach the optimal strength.

Q4. How can I make white glue dry faster?

A4. The drying time of glue depends on the glue formula, the temperature and humidity of the environment, the moisture content of the wood and the amount of glue used. Under the premise of using a reasonable amount of glue, you can consider increasing the temperature of the environment and reducing the humidity of the environment. The conventional method is to use tools such as heating lamps, air conditioners, and hair dryers to increase the drying speed; of course, you can also ask the glue manufacturer to provide glue that dries faster.

Q5. What are the types of wood PVA white glue?

A5. According to the type of wood, it is divided into MDF/particleboard/plywood/solid wood board wood PVA white glue; according to the purpose, it is divided into cabinet/wardrobe/floor/door/decorative material/DIY/handicraft wood PVA white glue; according to the performance, it is divided into Strong Bonding/Waterproof/Fast Drying/Eco-Friendly/Durable/Low-VOC/Biodegradable wood PVA white glue.

Where to buy wood PVA white glue in China

Furniture manufacturers or adhesive traders need to buy wood PVA white glue, you can choose Zhongshan Blue Rhino New Materials Co., Ltd., which is the Best PVA Wood Glue Suppliers, Manufacturers, Exporters, Factory in China. We can match you with the right wood PVA white glue according to the wood type, glue drying time, solid content, viscosity, etc. Support OEM/bulk/bulk ordering of glue.

Why choose our wood white glue

1、With 20 years of experience in adhesive research and development, well-known woodworking white glue supplier in China, our technical engineers have a thorough understanding of bonding substrates and gluing processes, greatly improving your production efficiency.

2、In order to ensure the stable quality of the adhesive, all raw materials used come from international chemical giants, such as: LG Chem, Celanese, Dow Chemical, BASF, Sinopec

3、18 fully automatic intelligent glue production lines, well-known woodworking white glue manufacturers in China, with an annual output of more than 50,000 tons, and sufficient inventory to ensure that goods reach customers on time.

4、Our adhesives have SGS, VOC, ROHS, ISO9001 and other test reports to ensure that the glue is safe and environmentally friendly.

5、We have many years of experience in international logistics and transportation, and are familiar with sea shipping, land transportation, air transportation and other methods, so you don’t have to worry about glue transportation.

Order process