Today I will mainly share with you several parameters and indicators of water-based labeling adhesives to help manufacturers choose water-based labeling adhesives:
The purpose of pressurizing the board is to allow the glue to better penetrate the board and form glue nails to ensure that the boards using panel glue can achieve the adhesive effect.Below, we will explain the matters that need to be paid attention to before, during, and after pressurizing the panels:
Therefore, the curing speed is also a matter of concern to most people.Let me share with you the main reasons for the slow curing speed of white glue and the corresponding solutions:
in daily use, there are some details that manufacturers need to pay attention to at all times. If these details are not paid attention to, it is easy to cause debonding or false adhesion. Below, I will share with you these details of EVA hot melt adhesive:
what is solid wood laminate splicing glue. Why is solid wood laminate splicing glue water-resistant? Then let’s find out, what are the Japanese JAS boiling water immersion peel test standards. What kind of results can meet the JAS test standards?
why the wood is so prone to cracking after using glue to join the wood if the drying and storage time is insufficient before splicing. This is mainly due to the internal stress inside the wood.
in actual production, furniture manufacturers need to pay attention to what they need to pay attention to when using woodworking glue. Let me share with you below.
We have always recommended that the ambient humidity is 40-60% as the optimal ambient humidity for solid wood laminating. However, if you need to perform a lamination process when the humidity in the air is high, we recommend that furniture manufacturers use solid wood laminated adhesive when splicing. The following needs to be done:
Some friends cannot distinguish specific categories and different uses when consulting our products. Let me explain to you the differences between woodworking glue and white latex glue:
Use a glue gun for spraying. The optimal diameter of the spray gun nozzle is 1.5-2.5mm. If the diameter of the spray gun is too small, it will easily block the spray gun and affect the work efficiency of the workers.
One of China Top 5 Adhesive factory,manufacturers, suppliers, exporters. Free samples available.
Mobile / WhatsApp / WeChat:
+86 137 0239 0495
Email: sales@bluerhino-adhesive.com
We will contact you within 1 working day, please pay attention to the email with the suffix —“sales@bluerhino-adhesive.com”.
