PUR edge banding hot melt adhesive is composed of moisture-curing reactive polyurethane hot melt adhesive. furniture factory PUR edge banding glue supplier, product has high strength, fine line, heat & water resistant, chemical corrosion resistance and aging resistance, low-VOC. It is divided into PUR glue specially used for semi-automatic/automatic edge banding machines.
Industrial PUR reactive hot melt glue, Can pass GB/T 18583-2008, ROHS, REACH, phthalate 17P, etc.
Application :PUR adhesive for PVC/ABS/PP/wood veneer/veneer/melamine/paper edge banding.
PUR edge banding adhesive for MDF/plywood/particleboard/aluminum honeycomb panel/solid wood.
PUR edge banding adhesive for cabinets/wardrobes/wooden doors/bathroom/medical cabinet cabinets.
| Color | Transparent, white |
|---|---|
| Gluing method | Machine gluing, Manual gluing |
| Open time | 10-45 seconds |
| Application temperature | 130-160°C |
| Heat resistant | 120°C |
| Ambient temperature | 5-40°C |
| Water resistant | yes |
| Shelf life | 12 months |
Universal for aluminum and wood, slotting and punching can be done after edge banding, no need to clean the glue slot
Can pass hot and cold cycle test and water and heat resistance test, low glue amount, no glue line
PUR Edge Banding Hot Melt Adhesive is a reactive polyurethane (PUR) hot melt glue used in furniture manufacturing to bond edge banding materials (such as PVC, ABS, wood veneer, or melamine) to panel substrates like MDF, particle board, and plywood.
It is widely used in the furniture industry to achieve strong, durable, and nearly invisible bonding lines, especially for high-end cabinets, wardrobes, kitchen furniture, and office furniture.
Our exports PUR edge banding hot melt adhesive is widely used for:
PVC、ABS、Acrylic、Kraft paper、Non woven wood veneer、Solid wood veneer、Wood chips etc.
PUR edge banding hot melt adhesive is preferred in modern furniture production because it:
A1. a. The edge band is too thick and does not match the selected glue. b. The amount of glue applied is too low. c. The selected glue development time is too long. d. The edge banding speed is too fast and the initial bonding strength of the glue is poor. e. The melt temperature is set too low. f. The pressure of the pressure wheel is insufficient.
A2. a. The time of standing in the natural environment is too short. b. The amount of glue applied is too low. c. The temperature and humidity of the environment are too low, resulting in the glue not being able to solidify. d. The selected glue is not compatible with the bonding material.
A3. If it is used continuously, it does not need to be cleaned. However, if it is used for the first time, the glue suction cup and straw need to be cleaned before use.
A4. Yes, Blue Rhino’s universal version of PUR hot melt adhesive can be used at 10-35°C (excluding special weather temperatures). However, it is recommended to use fast-curing types in summer and slow-curing types in winter.
A5. According to the degree of automation, it is divided into semi-automatic/fully automatic edge banding machine PUR edge banding hot melt adhesive; according to the edge banding material, it is divided into PVC/ABS/PET/veneer/paper PUR edge banding hot melt adhesive; according to the board material, it is divided into MDF/PB/HDF/solid wood/acrylic board/Aluminum Honeycomb board PUR edge banding hot melt adhesive; according to the purpose, it is divided into cabinet/wardrobe/door/bathroom cabinets PUR edge banding hot melt adhesive.
A6. Yes, PUR hot melt adhesive can be cured to form a stable cross-linking reaction, which enables it to achieve water resistance. This is also an advantage of PUR hot melt adhesive.
A7. PUR edge banding hot melt adhesive reduces the gap between the board and the edge banding strip by using less adhesive and stronger adhesion, thus achieving zero adhesive lines.
A8. After PUR hot melt adhesive is fully cured, its softening point can be as high as 120-150°C, while that of EVA hot melt adhesive is 80-100°C. Therefore, PUR hot melt adhesive is more suitable for kitchen furniture in environments with higher temperatures.
A9. Currently, the mainstream water resistance test is divided into three types: placing the sealed board in room temperature water, warm water (60-70°C), and boiling water (100°C), and observing the time it takes for the sealed edge of the board to show no peeling or bubbling.
A10.The initial physical curing time is 3-10 seconds, the initial chemical curing time is 2 hours, and the complete chemical curing time requires 72 hours.
Through ten years of technology research and development investment, Zhongshan Blue Rhino New Materials Co., Ltd. has become one of the best PUR edge banding hot melt adhesive factories, manufacturers, suppliers, and exporters in China. If you want to buy or customize furniture PUR edge banding hot melt adhesive, you can contact us.
Whether you are a furniture manufacturer or trader, with strong production capacity and R&D capabilities, Zhongshan Blue Rhino New Materials Co., Ltd. supports OEM PUR edge banding hot melt adhesive in China.
| Feature | PUR Hot Melt Adhesive | EVA Hot Melt Adhesive |
|---|---|---|
| Glue line | Invisible | Visible |
| Bonding type | Chemical (thermoset) | Physical (thermoplastic) |
| Water resistance | Excellent | Low |
| Heat resistance | High | Medium |
| Durability | Very high | Medium |
| Cost | Higher | Lower |
| Application level | Premium furniture | Standard furniture |
PUR Edge Banding Hot Melt Adhesive is a reactive polyurethane hot melt system designed for premium furniture edge banding applications. It provides strong structural bonding, excellent environmental resistance, and a seamless finish, making it the top choice for high-end furniture manufacturing.
1. With 20 years of experience in adhesive research and development, well-known pur edge banding hot melt adhesive supplier in China,our technical engineers have a thorough understanding of bonding substrates and gluing processes, greatly improving your production efficiency.
2. In order to ensure the stable quality of the adhesive, all raw materials used come from international chemical giants, such as: LG Chem, Celanese, Dow Chemical, BASF, Sinopec
3. 18 fully automatic intelligent glue production lines, well-known pur edge banding hot melt adhesive manufacturer in China, with an annual output of more than 50,000 tons, and sufficient inventory to ensure that goods reach customers on time.
4. Our pur edge banding hot melt adhesive have SGS, VOC, ROHS, ISO9001 and other test reports to ensure that the glue is safe and environmentally friendly.
5. We have many years of experience in international logistics and transportation, and are familiar with sea shipping, land transportation, air transportation and other methods, so you don’t have to worry about glue transportation.
Receive your message, we will contact you within 1 working day, please pay attention to the email with the suffix —“sales@bluerhino-adhesive.com”.
A factory with more than 10 years of adhesive experience will answer your questions
Zhongshan Blue Rhino New Materials Co., Ltd. is one of the top five wood and paper adhesive manufacturers, suppliers, and exporters in China. Free samples available.
Mobile / WhatsApp / WeChat:
+86 137 0239 0495
Email: sales@bluerhino-adhesive.com
We will contact you within 1 working day, please pay attention to the email with the suffix —“sales@bluerhino-adhesive.com”.
